2020
1
1
0
60
1

Fuzzy bilevel linear programming problem using TOPSIS approach
http://fomj.qaemiau.ac.ir/article_543187.html
1
This paper deals with a class of bilevel linear programming problem (BLPP) with fuzzy data. Fuzzy data are mainly considered to design the reallife BLPP. So we assume that the coefficients and the variables of BLPP are trapezoidal fuzzy numbers and the corresponding BLPP is treated as fuzzy BLPP (FBLPP). Traditional approaches such as vertex enumeration algorithm, Kthbest algorithm, KrushKuhnTucker (KKT) condition and Penalty function approach for solving BLPP are not only technically inefficient but also lead to a contradiction when the follower’s decision power dominates to the leader’s decision power. Also these methods are needed to solve only crisp BLPP. To overcome the difficulty, we extend Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) in fuzzy environment with the help of ranking function. Fuzzy TOPSIS provides the most appropriate alternative solution based on fuzzy positive ideal solution (FPIS) and fuzzy negative ideal solution (FNIS). An example is included how to apply the discussed concepts of the paper for solving the FBLPP.
0

1
10


Shyamali
Ghosh
Dept. of Applied Mathematics with Ocenology and Computer Programming,
Vidyasaghar University, India
Iran
shyamalighosh1989@gmail.com


Sankar Kumar
Roy
Department of Applied Mathematics with Oceanology and Computer Programming
Iran
sankroy2006@gmail.com
Bilevel linear programming
Fuzzy programming
TOPSIS
Compromise solution
1

A Hybrid Algorithm for Fault Diagnosis using Fuzzy Clustering Tools
http://fomj.qaemiau.ac.ir/article_545576.html
1
In this paper, a hybrid algorithm using fuzzy clustering techniques is proposed for developing a robust fault diagnosis platform in industrial systems. The proposed algorithm is applied in a fault diagnosis scheme with online detection of novel faults and automatic learning. The hybrid algorithm identifies the outliers based on data density. Later, the outliers are removed, and the clustering process is performed. To extract the important features and improve the clustering, the maximumentropyregularized weighted fuzzy cmeans is used. The use of a kernel function allows achieving a greater separability among the classes by reducing the classification errors. Finally, a step is used to optimize the parameters m (regulation factor of the fuzziness of the resulting partition) and (bandwidth, and indicator of the degree of smoothness of the Gaussian kernel function). The proposed hybrid algorithm was validated using the Tennessee Eastman (TE) process benchmark. The results obtained indicate the feasibility of the proposal.
0

11
31


Adrián
Rodríguez Ramos
Departamento de Automática y Computación, Universidad Tecnológica de la Habana José Antonio Echeverría, CUJAE, La Habana, Cuba
Iran


Pedro Juan
RiveraTorres
Departamento de Ciencias de Computos, Universidad de Puerto Rico, Recinto de Río Piedras, San Juan, Puerto Rico
Iran


Antônio José
da Silva Neto
Instituto Politécnico da Universidade do Estado do Rio de Janeiro (IPRJ/UERJ), Nova Friburgo, RJ, Brazil
Iran


Orestes
LlanesSantiago
Politécnico da Universidade do Estado do Rio de Janeiro (IPRJ/UERJ), Nova Friburgo, RJ, Brazil
Iran
orestes@tesla.cujae.edu.cu
Automatic learning
Online detection
Fuzzy clustering tools
Optimal parameters
1

The Reference Ideal Method and the Pythagorean Fuzzy Numbers
http://fomj.qaemiau.ac.ir/article_545712.html
1
As it is well known, in spite of having small dimensions, there are daily manysituations that require the solution of a decisionmaking problem: eating, streetscrossing, assessments, shopping and so on. Generally, the way of working onthese types of problems depends on how the information used to evaluate eachalternative is provided and represented, as for instance is the case with: crisp values, fuzzy values, Pythagorean values, etc. In this way, different very wellknownmethods have been developed and modified to help to solve this kind ofproblems. Among them, the following may be remarked: AHP, PROMETHEE,ELECTRE, VIKOR, TOPSIS. But there are many other. This paper shows howto apply the socalled Reference Ideal Method (RIM), previously developed bythe authors, when Pythagorean Fuzzy numbers are used to evaluate eachalternative. The paper shows how to solve a decisionmaking problem throughthe proposed method using such kind of fuzzy numbers and, in order to showhow to practically apply the RIM method, an illustrative example is provided.
0

32
41


Elio
Cables
Depto de Ingeniería Informática, Universidad de Holguín "Oscar Lucero Moya", Holguín, Cuba
Iran
payizan_ae58@yahoo.com


María Teresa
Lamata
University of Granada
Iran
mtl@decsai.ugr.es


Jose Luis
Verdegay
Computer Science and Artificial Intelligence, University of Granada, Spain
Iran
verdegay@ugr.es
Reference Ideal Method (RIM)
TOPSIS
Pythagorean Fuzzy Set
MCDM
1

Optimum Selection of Drill Bits for Drilling Operations in Sarvak and Asmari Formations Using a Fuzzy Multiple Criteria DecisionMaking Approach
http://fomj.qaemiau.ac.ir/article_669003.html
1
Proper decision making in drilling bit selection issue may contribute to drilling efficiency and considerable cost reduction. Since the bit selection is a Multiple Criteria DecisionMaking (MCDM) problem, MCDM techniques are the most powerful approaches to be applied in such cases. In this study, among MCDM approaches and with respect to great accuracy and validity of results, fuzzy TOPSIS method is utilized for optimum bit selection for drilling operations in Sarvak and Asmari formations in an Iranian oil field. With this regard, three types of bits (i.e. 517, 527 and 537) candidate in Asmari & Sarvak formations are analysed using fuzzy TOPSIS method to rank and prioritize the alternatives, leading to choose the best option. Considering bits operating in Asmari formation, similarity factors for bit types of 517, 527 and 537 bits found to be 0.479, 0.438 and 0.382, respectively indicating bit type 517 can be considered a proper option compared to other ones. Similarly, achieved results from application of fuzzy TOPSIS approach in Sarvak formation shows 0.5405, 0.5019 and 0.5622 values for 517, 527 and 537 bit types respectively, demonstrating the bit type 537 is the most appropriate alternative in Sarvak formation.
0

42
51
آرش
ابراهیم آبادی
Arash
Ebrahimabadi
Department of Mining, Qaemshahr Branch, Islamic Azad University, Qaemshahr, Iran
Iran
arash.xer@gmail.com
سیاوش
مرادی
Siavash
Moradi
Department of Petroleum Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Iran
siavash.moradi@srbiau.ac.ir
Bit Selection
Fuzzy TOPSIS
Asmari Formation
Sarvak Formation
1

Ranking method for efficient units by RPA and TOPSIS in DEA
http://fomj.qaemiau.ac.ir/article_669004.html
1
This paper considers the rank of set efficient units in Data envelopment analysis (DEA). DEA measures the efficiency of decision making units (DMUs) within the range of less than or equal to one. The corresponding efficiencies are referred to as relative efficiencies, which describe the best performances of DMUs, and these efficient units determine efficiency frontier. This research proposes an extended on a current research by a technique for order preference by similarity to an ideal solution (TOPSIS) method. Therefore, in this paper, we first introduce two methods namely regular polygon area (RPA) and TOPSIS. Then using common set of weights in order to all efficient units obtained from DEA models, they are projected into twodimensional plane. Finally, the units are ranked by RPA and TOPSIS methods. Also, with the numerical example, our method is compared with other methods. The obtained results of numerical example show that they are almost close to each of several methods.
0

52
60
فرزاد
رضائی بالف
Farzad
Rezai Balf
Department of Mathematics, Qaemshahr Branch, Islamic Azad University, Qaemshahr, Iran.
Iran
fr.balf@qaemiau.ac.ir
Data Envelopment Analysis (DEA)
RPA, TOPSIS
Ranking